Umidade ascendente em paredes de tijolo furado: avaliação de barreiras químicas
Nenhuma miniatura disponível
Data
2023-06
Autores
Orientador
Mascolo, Rafael
Banca
Spinelli, Rodrigo
Fransozi, Carolina Becker Pôrto
Título do periódico
ISSN
Título do Volume
Editor
Resumo
A umidade ascendente em paredes de alvenaria é um problema comum em edificações, causando danos estruturais e comprometendo a segurança das construções. Este estudo tem como objetivo avaliar a eficácia de dois tipos de bloqueadores químicos no tratamento da umidade ascendente em paredes de tijolo furado. Foram realizados ensaios laboratoriais no Laboratório de Tecnologia da Construção (LATEC) da Universidade do Vale do Taquari - UNIVATES. O processo envolveu a execução de mini paredes de alvenaria com base de concreto de altura total de 34 cm, e posteriormente a aplicação dos bloqueadores químicos. A saturação dos corpos de prova foi realizada colocando as bases em um tanque com lâmina de água de 5 cm de altura. Os resultados obtidos mostraram um aumento na massa das amostras de 7,1% em contato com a lâmina de água ao longo do tempo, indicando a absorção de umidade por capilaridade. Por outro lado, a amostra que não teve contato com água apresentou uma redução na massa de 0,68% devido à perda de umidade residual. Após a aplicação dos bloqueadores químicos, observou-se uma redução média semanal da massa de 1,07% e 0,82% das amostras A e B tratadas no período de 49 dias, indicando a eficácia dos bloqueadores na infiltração de umidade.
Rising damp in masonry walls is a common problem in buildings, causing structural damage and compromising the safety of constructions. This study aims to evaluate the effectiveness of two types of chemical damp proof courses in treating rising damp in cavity brick walls. Laboratory tests were conducted at the Construction Technology Laboratory (LATEC) of the University of Vale do Taquari - UNIVATES. The process involved constructing mini masonry walls with a concrete base, measuring a total height of 34 cm, followed by the application of the chemical damp proof courses. Saturation of the test specimens was achieved by placing the bases in a tank with a 5 cm water level. The results obtained showed a 7.1% increase in the mass of the samples in contact with the water level over time, indicating moisture absorption through capillarity. On the other hand, the sample that did not come into contact with water exhibited a 0.68% decrease in mass due to the loss of residual moisture. After the application of the chemical damp proof courses, an average weekly reduction in mass of 1.07% and 0.82% was observed for samples A and B, respectively, over a period of 49 days, indicating the effectiveness of the damp proof courses in preventing moisture infiltration.
Rising damp in masonry walls is a common problem in buildings, causing structural damage and compromising the safety of constructions. This study aims to evaluate the effectiveness of two types of chemical damp proof courses in treating rising damp in cavity brick walls. Laboratory tests were conducted at the Construction Technology Laboratory (LATEC) of the University of Vale do Taquari - UNIVATES. The process involved constructing mini masonry walls with a concrete base, measuring a total height of 34 cm, followed by the application of the chemical damp proof courses. Saturation of the test specimens was achieved by placing the bases in a tank with a 5 cm water level. The results obtained showed a 7.1% increase in the mass of the samples in contact with the water level over time, indicating moisture absorption through capillarity. On the other hand, the sample that did not come into contact with water exhibited a 0.68% decrease in mass due to the loss of residual moisture. After the application of the chemical damp proof courses, an average weekly reduction in mass of 1.07% and 0.82% was observed for samples A and B, respectively, over a period of 49 days, indicating the effectiveness of the damp proof courses in preventing moisture infiltration.
Descrição
Palavras-chave
Umidade ascendente; Capilaridade dos materiais; Bloqueadores químicos; Rising damp; Capillarity of materials; Chemical blockers
Citação
DANIELI, Felippe Renato. Umidade Ascendente em Paredes de Tijolo Furado: avaliação de barreiras químicas. 2023. Artigo (Graduação) – Curso de Engenharia Civil, Universidade do Vale do Taquari - Univates, Lajeado, 04 jul. 2023. Disponível em: http://hdl.handle.net/10737/3845.