Desenvolvimento de um conversor para soldagem por ponto costura
Nenhuma miniatura disponível
Data
2023-06
Autores
Orientador
Stypulkowski, Yuri Solis
Banca
Vorpagel, Mateus
Marques, Patric Janner
Título do periódico
ISSN
Título do Volume
Editor
Resumo
O presente trabalho tem por objetivo o desenvolvimento de um circuito conversor para executar o comando de uma máquina de solda por resistência de ponto costura que executa a soldagem de corpos de folhas de aço para o fechamento de embalagens de aço. A máquina é alimentada por uma rede industrial trifásica de 380 Vca e possui um transformador para a soldagem por resistência elétrica do material. O conversor desenvolvido é dividido em duas partes: circuito de potência, formado por uma ponte retificadora e um inversor e circuito de comando, possuindo um microcontrolador para a parte lógica, gerando um acionamento de frequência modulada e dois drivers responsáveis pelo acionamento do inversor. Este circuito de comando é o responsável pelo chaveamento do transformador da máquina. Neste trabalho foram realizados dois testes envolvendo modulação por largura de pulso com dois microcontroladores diferentes, ambos microcontroladores apresentaram capacidade para executar os comandos sem oscilações no formato de onda para o chaveamento do transformador.
The present work aims to develop a converter circuit to execute the control of a resistance spot welding machine that performs the welding of steel sheet bodies for the closure of steel packaging. The machine is powered by a three-phase industrial network of 380 VAC and has a transformer for resistance welding of the material. The developed converter is divided into two parts: power circuit, consisting of a rectifier bridge and an inverter, and control circuit, including a microcontroller for the logic part, generating frequency modulated drive, and two drivers responsible for the inverter control. This control circuit is responsible for switching the machine's transformer. In this work, two tests involving pulse width modulation were performed with two different microcontrollers, and both microcontrollers demonstrated the ability to execute the commands without oscillations in the waveform for transformer switching.
The present work aims to develop a converter circuit to execute the control of a resistance spot welding machine that performs the welding of steel sheet bodies for the closure of steel packaging. The machine is powered by a three-phase industrial network of 380 VAC and has a transformer for resistance welding of the material. The developed converter is divided into two parts: power circuit, consisting of a rectifier bridge and an inverter, and control circuit, including a microcontroller for the logic part, generating frequency modulated drive, and two drivers responsible for the inverter control. This control circuit is responsible for switching the machine's transformer. In this work, two tests involving pulse width modulation were performed with two different microcontrollers, and both microcontrollers demonstrated the ability to execute the commands without oscillations in the waveform for transformer switching.
Descrição
Palavras-chave
RSEW; Microcontrolador; Solda por resistência; Microcontroller; Resistance welding
Citação
SCHUBERT, Karolina Amanda. DESENVOLVIMENTO DE UM CONVERSOR PARA SOLDAGEM POR PONTO COSTURA. 2023. Monografia (Graduação em Engenharia Elétrica) – Universidade do Vale do Taquari - Univates, Lajeado, 05 jul. 2023. Disponível em: http://hdl.handle.net/10737/3726.